PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
PHILSTAIN 410 NiMo
AWS Specification: AWS A5.4 E410NiMo-16
JIS Specification: NONE
Other Specification: NONE
I. APPLICATIONS:
PHILSTAIN 410 NiMo is for welding of 13% Cr Steel. Surfacing of carbon steel to resist heat, corrosion, erosion and abrasion.
II. DESCRIPTION:
PHILSTAIN 410 NiMo is for welding of 13% Cr Steel. Surfacing of carbon steel to resist heat, corrosion, erosion and abrasion.
III. NOTES ON USAGE:
-
Preheat at 200 - 400°C as weld metal has self-hardening properties.
-
Postheat at 700 - 800°C in order to improve the structure and to stress relieve after welding.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Cr |
Ni |
Mo |
0.043 |
0.27 |
0.33 |
12.18 |
4.52 |
0.068 |
V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:
Tensile Strength N/mm2 (Ksi) |
Elongation % |
917 (133) |
18 |
VI. WELDING POSITIONS: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):
Diameter (mm) |
|
2.5 |
3.2 |
4.0 |
5.0 |
Length (mm) |
|
300 |
350 |
350 |
350 |
Ampere |
Flat |
50 - 80 |
70 - 110 |
100 - 150 |
130 - 180 |
V & OH |
45 -75 |
65 - 105 |
95 - 140 |
|