PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
Nickelarc 182
AWS Specification : AWS A5.11 E NiCrFe-3
JIS Specification: NONE
Other Specification: DIN 1736 EL-NiCr15FeMn
I. APPLICATIONS:
Since Nickelarc 182 is so versatile, it can be used for countless applications.
However more common applications include the chemical or petrochemical industries and the nuclear industry where it is used to weld dissimilar joints between vessels and primary piping. PHILARC Nickelarc 182 is often used for welding the clad side of nickel-chromium-iron clad steel and for re-surfacing steel.
II. DESCRIPTION:
Nickelarc 182 is a “General Purpose” nickel-chromium-iron flux-coated electrode used for joining many dissimilar combinations of nickel base alloys, of the nickel chromium type, to themselves or to stainless or mild steels. This electrode will consistently produce x-ray quality and machinable weld deposits. Excellent for welding Inconel® 600 to itself or to carbon steel and stainless steels; or high chromium Incoloy® 800 to nickel-copper Monel® 400 or nickel base alloy 200. PHILARC Nickelarc 182 is also used for joining nickel base alloy 200 to stainless steel and nickel-copper Monel® 400 to carbon steel
III. NOTES ON USAGE:
-
Preheating is not necessary in general.
-
Avoid the continuous welding if possible. It is effective to weld under 150ºC for reducing cracking tendency.
-
Dry the electrodes at 150 ~ 200ºC for 30 ~ 60 minutes before use.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Fe |
Ni |
Mo |
Cr |
Nb & Ta |
0.03 |
0.40 |
5.00 |
3.00 |
Bal. |
1.50 |
19.00 |
2.22 |
V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:
Yield Point N/mm2 (ksi) |
Tensile Strength N/mm2 (ksi) |
Elongation % |
Impact Value °C, J (°F, Ft-Lbs) |
654 (95) |
373 (54) |
35 |
-30°, 100 (-22, 74) |
VI. WELDING POSITIONS: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS: DC (+)
Size (mm) |
Dia. |
3.2 |
4.0 |
5.0 |
|
Length |
350 |
350 |
350 |
||
Current Range |
Flat |
70~110 |
100~150 |
130~180 |
|
Amp |
Vertical & OH |
65~105 |
95~140 |
- |