PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
PHILSTAIN 310
AWS Specifiction : AWS A5.4 E310-16
JIS Specification: JIS D 310-16
Other Specification: DIN 8556: E 2520 R 26
I. APPLICATIONS:
Fabrication of stainless steel structures and assemblies in the
chemical, petrochemical, power industries.
Product |
Grade |
Plate
AISI stainless steel |
BS 970 : Pt.1 : 1991 310S31 BS 1449 : Pt.2 : 1983 310S24 BS 1501 : Pt.3 : 1990 310S16 310 |
II. DESCRIPTION:
A rutile coated manual metal arc electrode for the welding of 310 austenitic stainless steel. PHILSTAIN 310 deposits 25%Cr-20% Ni weld metal which offers high temperature ductility and excellent resistance to oxidation at working temperatures of up to 1200ºC. PHILSTAIN 310 produces a smooth, even metal transfer with low spatter and a self releasing slag. The finished welds exhibit a slightly concave shape with good cosmetic appearance which requires little or no post weld dressing. The electrode is ideal for both fillet and butt welding applications. The smaller diameter electrodes can be used for vertical up and overhead welding.
Suitable for use with AC (minimum OCV of 70V) and DC+.
III. NOTES ON USAGE:
Prepare and fit the work carefully, cleaning the joints of all foreign material. Use AC (minimum OCV of 70V) or DC+ current. Proceed with the lowest current possible and short arc without allowing coating to touch molten pool. Short and intermittent welding is to be preferred to avoid overheating and distortion. Avoid excessive weaving. Electrodes should be coated. Discard exposed core wire by striking or scratch welding on a scrap plate until exposed core wire is consumed. Use dry electrodes to prevent blow hole in deposit. If necessary re-dry at 300ºC for 2 hours before use.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Mn |
Si |
Ni |
Cr |
P |
S |
0.1 |
2.19 |
0.41 |
20.75 |
25.98 |
0.018 |
0.010 |
V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:
Tensile Strength N/mm2 (Ksi) |
Elongation % |
581 (84) |
41 |
VI. WELDING POSITIONS: ALL POSITIONS
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):
Diameter (mm |
2.5 |
3.2 |
4.0 |
5.0 |
|
Length (mm) |
300 |
350 |
350 |
350 |
|
Current Range |
F |
50-80 |
70-110 |
100-150 |
130-180 |
V, OH |
45-75 |
65-105 |
95-140 |
- |