- Stainless Steel Electrodes - PHILSTAIN 308H

PHiLARC Products

Certification of Quality

PHILSTAIN 308H

AWS Specification: AWS A5.4 E308H-16

JIS Specification: NONE

Other Specification: NONE

I. APPLICATIONS:

Typical applications include chemical, petrochemical industries as well

as distillery, dairy and restaurant equipment.

II. DESCRIPTION:

PHILSTAIN 308H is used to weld un-stabilized austenitic stainless steels such as 302, 304 and 305. It provides greater corrosion resistance than the base metals on which they are applied.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C	Mn	Si	Cr	Ni
0.05	1.00	0.80	20.00	10.00

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:

Tensile Strength

N/mm² (ksi)

Elongation

600 (87)

V. WELDING POSITIONS: FLAT, VERTICAL UP, OVERHEAD

VI. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):

Diameter (mm		2.5	3.2	4.0	5.0
Length (mm)		300	350	350	350
Current Range	F	70-85	85-110	110-140	120-160
Current Range	V, OH	65-75	80-90	100-120	110-130

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

philarc-pa-308h.pdf