PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
PHILSTAIN 630
AWS Specification: AWS A5.4 E630-16
JIS Specification: NONE
Other Specification: NONE
I. APPLICATIONS:
PHILSTAIN 630 is a precipitation hardening stainless steel used for welding of materials of similar chemical composition whose mechanical properties influenced greatly by the heat treatment.
II. DESCRIPTIONS:
PHILSTAIN 630 is a precipitation hardening stainless steel used for welding of materials of similar chemical composition whose mechanical properties influenced greatly by the heat treatment.
III. NOTES ON USAGE:
-
Keep the arc length as short as possible.
-
The welding current should be used as low as possible.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Cr |
Ni |
Nb & Ta |
Cu |
0.043 |
0.42 |
0.38 |
16.68 |
4.68 |
0.36 |
3.57 |
V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:
Tensile Strength N/mm2 (Ksi) |
Elongation % |
977 (142) |
17 |
VI. WELDING POSITIONS: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):
Diameter (mm) |
|
2.5 |
3.2 |
4.0 |
5.0 |
Length (mm) |
|
300 |
350 |
350 |
350 |
Ampere |
Flat |
50 - 80 |
70 - 110 |
100 - 150 |
130 - 180 |
V & OH |
45 -75 |
65 - 105 |
95 - 140 |
|