- Solid Welding Wire (GMAW and GTAW) - PTS-2553

PHiLARC Products

Certification of Quality

PTS-2553

AWS Specification: AWS A5.9 ER 2553

I. APPLICATIONS:

For welding super duplex stainless steel grades chemical composition approx. 24-

27% Cr, 6-9% Ni, 3-4% Mo, 0.10-0.25% N alloyed also with Cu and/or W

II. DESCRIPTION:

PTS-2553 is highly suitable for welding ferritic-austenitic superduplex steels. By virtue of specific alloy composition the deposit has, in addition to high tensile strength and toughness, also excellent resistance to stress corrosion cracking and pitting corrosion. The operating temperature is -50 °C up to +250 °C. Well suited for the conditions in the offshore field.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C	Si	Mn	Cr	Ni	Mo	Cu	N
0.02	0.4	1.23	25.53	9.52	3.73	0.8	0.21

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

Tensile Strength N/mm²(Ksi)

Yield Point

N/mm²(Ksi)

Elongation %

760 (110)

590 (86)

V. SIZES AVAILABLE AND RECOMMENDED CURRENTS:

Diameter (mm)	1.6	2.4	3.2
Length (mm)	1000	1000	1000
Amps	80-110	130-160	160-200

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

philarc- pts-2553.pdf