PHiLARC - The No. 1 Choice of Welders

PTS-630

AWS Specification: AWS A.9 ER 630

 

I. APPLICATIONS:

For welding similar materials. A precipitation hardening stainless steel. Mechanical properties greatly influenced by heat.

II. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C

Si

Mn

Cr

Ni

Cu

Cb&Ta

0.04

0.51

0.63

16.48

4.52

3.53

0.31

III. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

Tensile Strength N/mm2 (Ksi)

Yield Point

N/mm2 (Ksi)

Elongation %

Hardness

as welded

1150 (167)

1060 (154)

9

34-38

IV. SIZES AVAILABLE :

Dia.(mm)

1.6

2.0

2.4

3.2

4.0

Length (mm)

1000

1000

1000

1000

1000

Unit wt./packing (kgs.)

5.0

5.0

5.0

5.0

5.0

 

TEST RESULT
 
The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.