PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
PTS-317/317L
AWS Specification: AWS A5.9 ER 317/317L
I. APPLICATIONS:
For welding similar stainless steels. Offers higher resistance to pitting and crevice corrosion.
II. DESCRIPTION:
PTS-317/317L is used to weld 317/317L stainless steels in which the raised Mo level provides improved resistance to pitting in high chloride environments and to some acids (not nitric acid). These steels are used in marine, chemical process, papermaking, and food processing applications. Also suitable for 316/316L and their stabilized versions when the benefits of higher molybdenum weld metal are required to maximize weld area pitting resistance. Not suitable for structural service above about 400°C, or for cryogenic applications.
III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Cr |
Ni |
Mo |
0.02 |
0.4 |
1.72 |
19.1 |
13.54 |
3.2 |
IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :
Tensile Strength N/mm2 (Ksi) |
Yield Point N/mm2 (Ksi) |
Elongation % |
570 (83) |
410 (59) |
39 |
V. SIZES AVAILABLE :
Dia.(mm) |
1.6 |
2.0 |
2.4 |
3.2 |
4.0 |
Length (mm) |
1000 |
1000 |
1000 |
1000 |
1000 |
Unit wt./packing (kgs.) |
5.0 |
5.0 |
5.0 |
5.0 |
5.0 |