- Solid Welding Wire (GMAW and GTAW) - PTS-310

PHiLARC Products

Certification of Quality

PTS-310

AWS Specification: AWS A5.9 ER 310

I. APPLICATIONS:

For welding type AIS 1 310, 304 clad stainless steel.

II. DESCRIPTION:

PTS-310 is used primarily for welding similar wrought or cast 25% Cr-20% Ni (310) parent alloys with up to 0.25% carbon. Parent metal and weld metal are fully austenitic. The high alloy content of type 310 gives useful oxidation resistance up to peak temperatures of about 1200°C.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C	Si	Mn	Cr	Ni
0.10	0.47	1.82	26.50	21.08

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

Tensile Strength N/mm²(Ksi)

Yield Point

N/mm²(Ksi)

Elongation %

580 (84)

420 (61)

V. SIZES AVAILABLE :

Dia.(mm)	1.6	2.0	2.4	3.2	4.0
Length (mm)	1000	1000	1000	1000	1000
Unit wt./packing (kgs.)	5.0	5.0	5.0	5.0	5.0

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

philarc-pts-310.pdf