PHiLARC - The No. 1 Choice of Welders

PTS-309L/PHILMIG 309L

AWS Specification: AWS A5.9 ER 309L

 

I. APPLICATIONS:

For welding similar 309 and 309L alloys or joining 300 series stainless steel to carbon or low alloy steels.

II. DESCRIPTION:

PTS-309L/PHILMIG 309L is a highly quality low carbon solid stainless steel rod for the Gas or Gas Tungsten Arc (TIG) and MIG welding of highly alloyed 309 or 309L type stainless steels.PTS-309L/PHILMIG 309L is also suitable for the dissimilar joining of other 300 series austenitic stainless steels to ferritic steels.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C

Si

Mn

Cr

Ni

0.03

0.36

2.04

23.51

13.48

IV. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :

Tensile Strength N/mm2 (Ksi)

Yield Point

N/mm2 (Ksi)

Elongation %

570 (83)

400 (58)

42

V. TIG ROD AVAILABLE SIZES:

Dia.(mm)

1.6

2.0

2.4

3.2

4.0

Length (mm)

1000

1000

1000

1000

1000

Unit wt./packing (kgs.)

5.0

5.0

5.0

5.0

5.0

VI. MIG AVAILABLE SIZES AND RECOMMENDED CURRENT:

Size (dia.x length) mm

Amps

0.8 x spool

60-180

0.9 x spool

70-200

1.0 x spool

70-200

1.2 x spool

90-250

1.6 x spool

200-300

 

 

TEST RESULT
 
The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.