PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
PTS-1CM
AWS Specification: AWS A5.28 ER 80S-G
I. APPLICATIONS:
For welding of 1.25% Cr - 0.50% Mo steel.
II. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Cr |
Mo |
0.07 |
0.52 |
1.01 |
1.24 |
0.54 |
III. TYPICAL MECHANICAL PROPERTIES OF WELD METAL :
Tensile Strength N/mm2 (Ksi) |
Yield Point N/mm2 (Ksi) |
Elongation % |
Impact Value °C,J (°F, Ft-Lbs) |
630 (91) |
540 (78) |
28 |
0°, 270 (32°,199) 690°C x 1hr |
IV. SIZES AVAILABLE :
Dia.(mm) |
1.6 |
2.0 |
2.4 |
3.2 |
4.0 |
Length (mm) |
1000 |
1000 |
1000 |
1000 |
1000 |
Unit wt./packing (kgs.) |
5.0 |
5.0 |
5.0 |
5.0 |
5.0 |