PHiLARC Products
- Carbon Steel Electrodes
- High Tensile Strength Steel
- For Low Temperature Steel
- Heat Resisting Steel Electrodes
- Atmospheric Corrosion Resisting
- Hardfacing Electrodes
- Stainless Steel Electrodes
- Nickel and Nickel Alloy Electrodes
- Cast Iron Electrodes
- Aluminum Alloy Electrodes
- Bronze and Copper Alloy Electrodes
- Gouging and Cutting Electrodes
- Solid Welding Wire (GMAW and GTAW)
- Oxy Fuel Gas Filler Rods for Brazing
- Oxy Fuel Gas Brazing FLuxes
- Submerged Arc Weding Wire and Flux
- Flux Cored Wires (FCAW)
PHILSTAIN 308L-15
AWS Specification: AWS A5.4 E308L-15
JIS Specification: D308L-15
Other Specification:
I. APPLICATIONS:
Welding of AISI types 301, 302 and 304 stainless steel.
II. DESCRIPTION:
PHILSTAIN 308L-15 is designed for welding of AISI types 301, 302 and 304 stainless steel. It is based on lime-titania formula and recommended for welding with DC + current Welds are porosity free with corrosion resistance comparable to that of base metal.
III. NOTES ON USAGE:
-
Keep the arc length as short as possible.
-
The welding current should be used as low as possible.
IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):
C |
Si |
Mn |
Cr |
Ni |
0.03 |
0.41 |
1.67 |
20.60 |
9.50 |
V. TYPICAL MECHANICAL PROPERTIES OF WELD METAL:
Tensile Strength N/mm2 (Ksi) |
Elongation % |
550 (80) |
44 |
VI. WELDING POSITIONS: ALL POSITIONS
VII. SIZES AVAILABLE AND RECOMMENDED CURRENTS (AC or DC + ):
Diameter (mm |
2.5 |
3.2 |
4.0 |
5.0 |
|
Length (mm) |
300 |
350 |
350 |
350 |
|
Current Range |
F |
50-80 |
70-110 |
100-150 |
130-180 |
V, OH |
45-75 |
65-105 |
95-140 |
- |