- Hardfacing Electrodes - TRACTORHARD 380

PHiLARC Products

Certification of Quality

TRACTORHARD 380

I. APPLICATIONS:

Hardfacing and building up of parts subject to impact, medium abrasion and high compressive stress such as track rollers and pads.

II. DESCRIPTION:

A rutile coated electrode for surfacing carbon steels subjected to metal to metal wear with resistance to impact and moderate abrasion. Easier to strike with minimal spatter, stable arc and good running properties. Welding in all position.

III. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C	Si	Mn	Cr
0.09	1.00	0.41	4.02

IV. HARDNESS OF WELD METAL DEPOSIT : 38 - 43 HRC (370 - 430 Hv)

V. WELDING POSITION: FLAT, VERTICAL UP, OVERHEAD

VI. SIZES AVAILABLE AND RECOMMENDED CURRENTS ( DC + ):

Size (dia. mm)	3.2	4.0	5.0
Length (mm)	350	350	350
Current Range (Amp)	90 - 130	120 - 180	170 - 230

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

phliarc-tractorhard 380.pdf