- Hardfacing Electrodes - ROLLERHARD 600Z

PHiLARC Products

Certification of Quality

ROLLERHARD 600Z

AWS Specification: NONE

JIS Specification: NONE

Other Specification: NONE

I. APPLICATIONS:

For maintenance and repair of many steel mill parts and sections where wearing is a problem, like in hot shear blades, bottom dies, stamping, punching and dies, and many other parts..

II. DESCRIPTION:

A rutile coated electrode for hardsurfacing hot working steels, undergoing metal to metal wear, undergoing a service temperature of 500ºC maximum. It has an excellent weldability in all position except vertical down.

III. HARDNESS OF WELD METAL DEPOSIT : 52 – 53 HRC (540-560 Hv)580°C x 2 hrs

IV. TYPICAL CHEMICAL COMPOSITION OF WELD METAL (%):

C	Si	Mn	Cr	Mo	W
0.42	0.66	0.29	8.85	1.22	10.58

V. WELDING POSITION: FLAT, FILLET, VERTICAL UP, HORIZONTAL, OVERHEAD

VI. SIZES AVAILABLE AND RECOMMENDED CURRENTS ( DC + ):

Size (dia. mm)	3.2	4.0	5.0
Length (mm)	350	350	350
Current Range (Amp)	90 - 130	120 - 180	170 - 230

TEST RESULT

The information contained or otherwise referenced herein is presented only as “typical” without guarantee or warranty, and Industrial Welding Corporation expressly disclaims any liability incurred from any reliance thereon. Typical data and Test results for mechanical properties, deposit or electrode composition and other properties were obtained from a weld produced and tested according to prescribed standards, and should not be assumed to be the expected results in a particular application or weldment. Actual results will vary depending on many factors, including, but not limited to, weld procedure, plate chemistry and temperature, weldment design and fabrication methods. Users are cautioned to confirm by qualification testing, or other appropriate means, the suitability of any welding consumable and procedure before use in the intended application.

philarc-rollerhard 600z.pdf